Matek MATEKSYS F405-SE F405 STM32F405RET6 Flight Controller Built-in OSD SD Slot DPS310 for RC Drone F405-CTR Updated version

Specifications

• MCU: 168MHz STM32F405RET6

• IMU: MPU6000 (SPI)

• Baro: DPS310 (I2C)

• OSD: AT7456E (SPI)

• Blackbox: MicroSD slot (SPI)

• VCP & 6x Uarts, 1x Softserial_Tx supported

• 9x PWM outputs (7x Dshot compatible with BF/INAV)

• 2x I2C

• 3x ADC (voltage, current, RSSI)

• 4x RX6 pad(one per corner) for BLheli32 ESC telemetry

• 4x individual ESC power/signal pads

• 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND

• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

• Built in inverter on UART2-RX for SBUS input

• PPM/UART Shared: UART2-RX

• Vbat filtered output power for VTX

• Camera control: Yes

• Smartaudio & Tramp VTX protocol: Yes

• DJI FPV OSD protocol: Yes

• WS2812 Led Strip : Yes

• Beeper : Yes

• RSSI: Yes

PDB Specifications

• Input: 6~36V (2~8S LiPo) w/TVS protection

• PDB: 4x35A (Max.4x46A)

• BEC: 5V 2A cont. (Max.3A)

• LDO 3.3V: Max.200mA

• Current Sensor 184A (Scale 179 in INAV/BF)

• Battery Voltage Sensor: 1K:10K

Firmware

• INAV: MATEKF405SE

• BetaFlight: MATEKF405SE

• ArduPilot: MATEKF405-WING

Physical

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

• Dimensions:  36 x 46 mm

• Weight: 10g

Including

• 1x F405-SE

• 6x silicon grommets M4 to M3

• 1x FR4 PCB Plate 36*36*1mm

• 1x Rubycon ZLH 35V/470uF (Low ESR)