Skip to product information
1 of 7

SoloGood.RC

DarwinFPV TinyApe Freestyle 2.5'' FPV Drone ELRS 8000KV RunCam Nano4 25-600mW VTX

DarwinFPV TinyApe Freestyle 2.5'' FPV Drone ELRS 8000KV RunCam Nano4 25-600mW VTX

Regular price $158.11 USD
Regular price Sale price $158.11 USD
Sale Sold out
Color


Tiny Ape Freestyle is the first 2.5'' drone for Darwinfpv. In order to meet the needs of more friends and we have made multiple attempts. It comes with the Darwin ELRS2.0 F411 15A Bluejay AIO and the VTX006 which has 25-600mW output power.

Drone Configuration:

Weight: 50.3g (without batteries and paddles)

Propeller: Genfan 2512 3-blade propeller

FC&ESC:F411 2S 15A FC(Built-in ELRS 2.4G receiver)

Built-in Receiver Protocol: SPI protocol

Motor: 1103 8000KV Brushless Motor

Camera: Run Cam Nano 4

VTX:25-600mW VTX

AIO Firmware: betaflight_4.3.0_BETAFPVF4SX1280

ESC Firmware: Bluejay_S_H_50_48_v0.14

Recommended Battery: 2S 380-450mah

Factory AIO firmware just only support ELRS_V1.0 if you want to use it with the ELRS V2.0 versionTX Module and you can programming Betaflight V4.3.0 RC1-RC3. The name of the firmware is BETAFPVF4SX1280. After flashing the ELRS_V2.0 flight controller firmware, you need to flash the CLI and VTX configuration files. The following are the built-in receiver pairing tutorials and CLI files that need to be flashed after the update:

Darwinfpv ELRS-V2.0 CLI

Darwin AIO 002 FC Pairing Tutorial

Run Cam Nano 4 Camera

The Run Cam Nano 4 uses a 1/3'' CMOS sensor, 2.1mm lens and 800TVL resolution for truer colors and clearer low-light night vision.

1103 8000KV Brushless motor

1103 8000KV Brushless motor is only 3.7g and it's power and thrust are surprising, and the flight time is achieved? Minutes. We have notice: the motor only supports 2S batteries, and if it is connected to 3S to push the oil too much the motor will be permanently damaged .

 

380mah(3S)

450mah(2S)

Landing voltage

9.75V

6.5V

VTX Power

400mW

400mW

Hover Time

8.25min

8.18min

VTX

VTX006 has 25-600mW output power and can provide stable images and powerful transmission. You can choose the perfect output power according to you FPV requirements. ( The default setting of the output power for Tiny Ape is 400mW)

 

Red light flashes frequency

 

Power

1

25mW

2

200mW

3

400mW

4

600mW

 Flight Control(FC)

This is an updated version of Darwin AIO. We integrated the ELRS receiver on the FC to make it easier to apply to mini drones. The ESC adopts Bluejay firmware, compatible with 1-3S Lipo input, 15A continuous current and 17A peak current. FC provides 2 sets of Uarts interfaces, and also provides various external device interfaces such as SBUS, Softserial, CTR, BUZZ, RGB, etc., which perfectly solves the problem of insufficient number of F411 Uarts.

The built-in receiver is an SPI protocol receiver, so you need to select SPI receiver support (SPI RX support) in the betaflight configurator. Under normal circumstances, the checkbox on the betaflight configurator receiver is empty. If the betaflight configurator used is 10.8.0 and above, the checkbox should select "EXPRESSLRS". As shown below:

 


 

 




 

Ingredients

Nutritional info

Shipping

View full details

Image with text

Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.