BETAFPV Meteor65 Pro 1S 65mm BWhoop Quadcopter FPV RC Racing Drone BNF F4 FC C02 Camera M03 VTX 0802 19500KV Brushless Motor


Color: Meteor65 Pro

Meteor65 Pro comes with 35mm propeller for power improvement and flexible flying experiment. Beyond that, it has almost the same components as Meteor65, like F4 1S 5A FC board with built-in ExpressLRS receiver, up to 350mW M03 VTX, 19500KV 0802SE motors etc.

Konw More About ExpressLRS

ExpressLRS is the most popular radio link in 2021. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. Know more about the ExpressLRS project on Github or join the discussion in the Facebook Group.

In order to meet the FPV polit's requirement for ELRS whoop drones, the ELRS 2.4G version Meteor65 Pro is here.

ExpressLRS is based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. it aims to achieve the best possible link performance in both speeds, latency, and range. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500Hz is currently supported with a custom OpenTX build. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.

More and more vendors start to support the ExpressLRS radio protocol in different parts, like radio transmitter with ELRS in stock, drone with built-in ELRS receiver, ELRS TX module for JR bay, or Nano bay. BETAFPV team take part in this project and provide a series of ExpressLRS components.


Tons of ExpressLRS items are available now!

How to Bind with Betaflight FC with SPI ExpressLRS Receiver.



  • Item: Meteor65 Pro 1S Brushless Whoop

  • Weight: 22.0g (without battery)

  • FC&ESC: F4 1S 5A FC (ELRS 2.4G)

  • Frame: Meteor65 Pro 65mm 1S Brushless Frame

  • Motors: 0802SE 19500KV Motor

  • Props: 35mm 3-blade props (1.0mm Shaft)

  • Camera: C02 Camera

  • VTX: M03 25-350mW VTX

  • Canopy: Canopy for Micro Camera

  • Battery: BT2.0 300mah 1S Battery

  • Flight time: 4 minutes

Meteor65 Pro Frame & 35mm Propeller

Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.


BT2.0 Connector

BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag. For more instruction, click here.

See the graph below of comparing the BT2.0 connector and PH2.0 connector (solid pin version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this test. The BT2.0 has double the time (about 2 minutes) and a 0.2v improvement in voltage sag.

Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0

Meanwhile, we provide 200 sets of BT2.0 300mah 1S battery(2pcs) as a free gift for everybody. Click here to grab BT2.0 battery / connector.

Much more choices of BT2.0 series accessories. We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 connectors for those people who want to convert the PH2.0 connector to BT2.0 connector.

  • BT2.0 Connectors (10pcs)

  • 2S Whoop Cable Pigtail (BT 2.0)

  • BT2.0 1S Whoop Cable Pigtail

  • BT2.0-PH2.0 Adapter Cable

  • BT2.0 Battery Charger and Voltage Tester

  • BT2.0 450mAh 1S Battery

  • BT2.0 300mAh 1S Battery

  • BT2.0 260mAh 1S Battery


0802SE 19500KV Motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.83g/pc but also ensuring the awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.

And the Racing version of Meteor65 is using the 0802 22000KV motors, which uses a ball bearing instead of brass bushings, and PCB connector. More durable and easier to repair once disconnected.



1. Cli Dump of Meteor65 Pro Whoop Quadcopter (Click here to find the details).







  • 1 * Meteor65 Pro Brushless Whoop Quadcopter (1S)

  • 2 * 300mAh 1S 30C Battery with BT2.0 connector

  • 1 * BT2.0 Battery Charger and Voltage Tester

  • 1 * TypeC USB cable

  • 1 * Customized Carry Case

  • 1 * Spare 35mm 3-blade props (1.0mm Shaft)

  • 1 * Screwdriver


Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed