Introduction:
I want to the fancy frame in flight perfectly , the lighter frame, the convenient electronics installation and balanced center of gravity, and the smooth flight shooting, these ideas create a new fancy frame is Mark4.
It is no longer a wide X design, but an H-shape, which does not affect the flight experience. The benefit is that the arm length is shortened, the weight is reduced, and the arm strength is increased. It is also provides more installation space for the middle position of the low center machine compartment. Of course, you can also mount the arm to the bottom for more installation space.
The mounting size of the FPV lens is adjusted to 19*19. There are 30.5*30.5 and 20*20 mounting holes in the middle section and the second half, and there are more directions in the selection of the flight control. In the middle section, 30.5*30.5 has been set up with soft-installed silica gel, which can reduce the pressure caused by vibration to the flight control for a greater extent, thus achieving smooth flight.
The arm of the frame is chamfered with the upper and lower plates. The upper plate uses a countersunk screw to make the surface more flat. There are also front and rear bumpers that allow the player to provide protection while flying while reducing losses and facilitating replacement. Of course, there are also custom-made thick aluminum columns to ensure the strength of the rack!
All the elements of this fancyframe, I believe that it can bring you flying fun and smooth flight shooting!
5inch parameters:
Name: GEP-Mark4-5
Weight: 102g
Wheelbase: 225mm
Blade size: 5inch
Size: 145*172mm
Arm thickness: 5mm
Body panel thickness: 2.5mm
Splint thickness: 2mm
Front and rear protection frame thickness: 2mm
6inch parameters:
Name: GEP-Mark4-6
Weight: 111g
Wheelbase: 260mm
Blade size: 6inch
Size: 162*203mm
Arm thickness: 5mm
Body panel thickness: 2.5mm
Splint thickness: 2mm
Front and rear protection frame thickness: 2mm
7inch parameters:
Name: GEP-Mark4-7
Weight: 121g
Wheelbase: 295mm
Blade size: 7inch
Size: 193*223mm
Arm thickness: 5mm
Body panel thickness: 2.5mm
Splint thickness: 2mm
Front and rear protection frame thickness: 2mm
5-inch recommended configuration:not include
Flight Control: RF/Kiss/F4/F3/F7
Motor: 2205/2206/2207/2207.5/2305/2306
ESC: 30A-50A
Battery: 4S 1500mAh ~ 6S 1150mAh
6 inch recommended configuration: not include
Flight Control: RF/Kiss/F4/F3/F7
Motor: 2207/2207.5/2305/2306/2407
ESC: 35A-60A
Battery: 4S 1500mAh ~ 6S 1300mAh
7 inch recommended configuration: not include
Flight Control: RF/Kiss/F4/F3/F7
Motor: 2207.5/2305/2306/2407/2408/2507
ESC: 40A-60A
Battery: 4S 1800mAh ~ 6S 2200mAh
Package Includes:
GEPRC Mark4 quadcopter frame * 1 set (version as your choice)
Camera , motor is not included!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.